4-Zone Wall Panel demo

4-Zone Wall Panel · TWL-SRC2

Wiring demo Get trade pricing

Loading the room…

Tap the keys on the panel. Hold a key for its long-press action.

Strip on the receiver

80 × 80 mm glass touch panel · 2 × AAA

What it's doing

Controlling: All zones
Zones on: 1 2 3 4
Light
Brightness

Try these

The zones in this room: 1 TV recess, 2 shelves, 3 fire recess, 4 floor wash.
Zone ON (top of keys 1 to 4) picks that zone; the sliders and B / S keys then work on it alone. Master ON picks all four.
Hold a zone ON or Master ON key: full white (not on RGB tape, which has no white chips).
Hold a zone OFF or Master OFF key: night light.
M steps through 9 colour modes; S− / S+ set the speed. Hold M to mix colour with white.
The moon under M switches off after 60 seconds (the demo counts it down 6× faster).

Pairing it to a receiver

Switch the receiver's power off and on again.
Within 3 seconds, tap a zone ON key 3 times. The lights blink 3 times when they're linked.
To unlink: power off and on, then tap that zone's ON key (or Master ON) 5 times within 3 seconds. The lights blink 9 times.

Works with the TWL-SZC1 5-in-1 receiver. 2.4GHz RF, up to 30 m. The modes shown here are illustrations; real colours and timings vary by receiver. Smart controls on seelight.co.uk